1-800-621-1563     

Home
May & June Promotions
Page:1 2 3 4 5 6
No Description
AFF 22 TON AIR/HYD JACK AFF 22 TON AIR/HYD JACK
Item #:005565E1
Mfg Item#:565E1
Supplier:AMERICAN FORGE & FOUNDRY
Category:JACKS & HYD

American Forge & Foundry (AFF) 22-Ton Air / Hydraulic Jack features a 1-piece handle and 1 year warranty. The heat-treated cylinder wall and chromed piston give added stability and longer jack life. Also features an alloy steel lifting mechanism for added durability and operator safety. Ram extension kit is included with 3/4", 2-3/4" and 4" extensions. Large 7-3/4" rear wheels allow for easy positioning. Capacity: 22 Tons. Ram Lift: 4-3/4". Low Height: 8-3/4". High Height: 21-1/2". Reach: 61". Width: 13". Shipping Weight: 107 lbs.
AME UNI-MOUNT THREAD GAUGE AME UNI-MOUNT THREAD GAUGE
Item #:00969260
Mfg Item#:69260
Supplier:AME INTERNATIONAL
Category:TIRE SUPPLIES

AME Uni-Mount Thread Gauge is designed for M22 x 1.5 Uni-Mount Studs. If the thread teeth do not fully engage the stud, the stud should be removed from service.
ASCOT SOCKET SET ASCOT SOCKET SET
Item #:014163-05153
Mfg Item#:163-05153
Supplier:ASCOT (SOCKETS)
Category:POWER TOOLS & SOCKETS

Ascot 1/2" Drive 29 piece Metric and SAE 6 Point Deep Impact Socket Set. Contains the following sizes: SAE - 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4"; Metric - 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, 27mm. The set also contains a 3/4" x 13/16" deep and 19mm x 21mm deep flip sockets.
ASCOT 3/4X1X13 TORQ WRCH EXT ASCOT 3/4X1X13 TORQ WRCH EXT
Item #:014169-13413
Mfg Item#:169-13413
Supplier:ASCOT (SOCKETS)
Category:POWER TOOLS & SOCKETS

Ascot 3/4" x 1" Torque Wrench Extension for use with Norbar type torque wrenches. Eliminates the need for the extension / socket combination and provides access to deep Budd wheels.
ASCOT LOW PRO BEAD LEVER TOOL ASCOT LOW PRO BEAD LEVER TOOL
Item #:016444-99719
Mfg Item#:444-99719
Supplier:ASCOT (TIRE REPAIR TOOLS)
Category:TIRE SUPPLIES

Ascot Low Profile Bead Lever Tool features an angled design and extra-long length for increased leverage. The super-grip knurled handle allows for increased grip. This tool provides technician better control of the tool against stiff sidewalls and helps protect against damaging expensive wheels.
TPMS DILL HEX NUT REMOVAL KIT TPMS DILL HEX NUT REMOVAL KIT
Item #:0175010
Mfg Item#:5010
Supplier:ASCOT (TPMS)
Category:TPMS

Dill TPMS Hex Nut Removal Kit allows technicians to safely remove a seized TPMS valve stem without damaging the wheel. Simply remove the valve core with a core remover or easy-out, install the o-ring and push it down with the drill guide, then install the drill bit and stop collar and begin drilling. In less than 30 seconds the corroded valve stem is no longer a problem.

To see a demonstrational video on the Hex Nut Removal Kit, please CLICK HERE.

BWP 19MM SLEEVE NUT ASC BWP 19MM SLEEVE NUT ASC
Item #:069M4215
Mfg Item#:333SN19
Supplier:BWP-NSI, INC
Category:TIRE SUPPLIES

The 19mm Wheel Tite Sleeve Nut (used on steel/steel drives and steel outer/alum inner drives) was developed to reduce wheel vibrations and to help prevent the unpredictable wheel-off situations. This system is specially designed for class 8 truck steer and drive axles, and trailers. Standard wheel nuts clamp against the disc surface, but fail to eliminate the extra space between the stud and the stud hole. The Wheel Tite Sleeve System helps lessen that space. Features a M22x1.5 Internal Thread, 33mm Hex and 240-hour salt-spray test.
BWP 28MM SLEEVE NUT ASC BWP 28MM SLEEVE NUT ASC
Item #:069M4216
Mfg Item#:333SN28
Supplier:BWP-NSI, INC
Category:TIRE SUPPLIES

The 28mm Wheel Tite Sleeve Nut (used on HD Aluminum, Super Single-Wide Base, alum outer/steel inner) was developed to reduce wheel vibrations and to help prevent the unpredictable wheel-off situations. This system is specially designed for class 8 truck steer and drive axles, and trailers. Standard wheel nuts clamp against the disc surface, but fail to eliminate the extra space between the stud and the stud hole. The Wheel Tite Sleeve System helps lessen that space. Features a M22x1.5 Internal Thread, 33mm Hex and 240-hour salt-spray test.
BWP 39MM SLEEVE NUT ASC BWP 39MM SLEEVE NUT ASC
Item #:069M4217
Mfg Item#:333SN39
Supplier:BWP-NSI, INC
Category:TIRE SUPPLIES

The 19mm Wheel Tite Sleeve Nut (used on dual aluminum drive axles) was developed to reduce wheel vibrations and to help prevent the unpredictable wheel-off situations. This system is specially designed for class 8 truck steer and drive axles, and trailers. Standard wheel nuts clamp against the disc surface, but fail to eliminate the extra space between the stud and the stud hole. The Wheel Tite Sleeve System helps lessen that space. Features a M22x1.5 Internal Thread, 33mm Hex and 240-hour salt-spray test.
ESCO SKIRT NUT ASC ESCO SKIRT NUT ASC
Item #:15540125
Mfg Item#:40125
Supplier:EQUIPMENT SUPPLY CO (ESCO)
Category:TIRE SUPPLIES

ESCO Skirt Nut penetrates the disc by approximately 2/3 of disc thickness, filling the space between the stud hole and the stud. This centers the wheel on the stud circle, ensuring the wheel runs concentrically to the hub. To maintain the correct clamping force, improve tire wear and eliminate the risk of wheel loss, 10 skirt nuts are required per wheel. As with all wheel attaching parts, Skirt Nut must be torqued to manufacturers specs.
  
Page:1 2 3 4 5 6